How To Turn Off Gas Fireplace With Wall Key. If you’re working with a fireplace key, place the key into the slot. Then turn the fireplace’s handle parallel into the gas pipes’ direction so that you can turn the gas on.
Usually a key is used for the main gas shutoff and is not used for daily on/off. To turn off the fire, twirl the key clockwise until the flame turns out to be very low. If you’re working with a fireplace key, place the key into the slot.
Table of Contents
If They Are Tight, Then Call The Gas Company And Have Them Check Everything.
Just to set the record straight, that valve is a service shut off, not an emergency shut off. Smelling gas constantly is not good, it's dangerous. How to turn on your gas fireplace in a condo or single family home.
The First Think You Want To Do Is Pull The Cover Off The Fireplace.
While holding down the pilot button, light a match close to the fire’s piping. Tighten the connections and check back if the fireplace works or not. If you have an emergency, you need to evacuate.
If You’re Working With A Fireplace Key, Place The Key Into The Slot.
Basically, all you need to do is insert that key into the right keyhole. This one is ventless but the process should be similar if it’s vented. Remove the decorative front and locate the heat or flame control.
Unscrew The Switch Cover Plate (Flat Screw Set 1) And The Switch Itself (Flat Screw Set 2) With A Flat Screwdriver.
How to light your gas fireplace without an ignitor. Turn on a gas fireplace with a key. Just turn the wall switch to the on position, and you can find the fireplace pilot to come on.
But Some Fireplaces Don’t Have Keys.
Usually a key is used for the main gas shutoff and is not used for daily on/off. Then turn the fireplace’s handle parallel into the gas pipes’ direction so that you can turn the gas on. Some older gas fireplaces have keys.